Hello!
I’ve built a very basic single-board system based on the 1.3 version of the mainboard. Here’s my question: should I start over with a 1.5 mainboard and go from there or would it be acceptable or possible use or adapt the 1.3 mainboard for use going forward? Are the expansion cards usable on either version of the mainboard?
Thank you!
Hi Ben,
The only issue with the 1.3 version of the mainboard has to do with the power supply side of it.
The designs of the bus and the expansion cards have not changed since the first version, and are perfectly compatible will all versions of the mainboard.
Excellent - I’m going to look at building one of the expansion cards then. Thanks!